AutomagNormally open hydronic system
PRODUCTS

Zone Valves

RI Series Valve

RI Series
Use with 2 wire mechanical pr programmable thermostats, powered directly from 24 VAC power source, on board indicator lights and relay with dry contact and switch, slow close to eliminate water hammer. Available in 1/2" and 3/4" for closure against 14' and 25' of circulator head, and 1" for closure against 16' of circulator head.

AA Series Valve

AA Series
Use with the Automag AZC 40P or 60P control and 2-wire mechanical or programmable thermostats or use with the Automag 50VA MB Power Supply and 3-wire thermostats. The "AA" series zone valves require a 24V DC power source which the AZC control and the MB power supply provide. Available in the same sizes and closure ratings as the RI Series zone valves.

AB Zone Valve
Designed for installation inside baseboard enclosure with a by-pass line for individual room temperature control on loop systems. Available in 3/4" only for closure against 8' of circulator head.

 

Controls & Power Supply

(For use with AA & AB Zone valves.)

AZC40P Control
4 zone relay control with priority

AZC60P Control
6 zone relay control with priority

50VAMB Power Supply
For use with 3-wire thermostats

 

Thermostats

RS260 Thermostat
Hermetically sealed contacts

RS260/75°
Hermetically sealed contacts with 75°F maximum setting

 

Parts & Accessories

Coils
#31 for AA 1/2 - 14 and AA 3/4 - 14
#29 for AA 1/2 - 25, AA 3/4 - 25, and AA 1 - 16
#32 for AA 3/4 - 8

RI-14 HD
Replacement head for RI 1/2 - 14 UR and RI 3/4 - 14 UR

RI-25/16 HD
Replacement head for AI 1/2 - 25 UR, AI 3/4 - 25 UR, and RI 1 - 16 UR

"C" Gasket
For 1/2" and 3/4" valves

"D" Gasket
For 1" valves

CNV84 Relay
Relay to adapt existing 3-wire thermostat system to 2-wire thermostats. (One relay required for each thermostat.)

Repair Kit - 14
Replacement plunger assembly, gasket and bolts for 1/2" - 14 and 3/4" - 14 valves.

Repair Kit - 25
Replacement plunger assembly, gasket and bolts for 1/2" - 25 and 3/4" - 25 valves.

Repair Kit - 16
Replacement plunger assembly, gasket and bolts for 1" - 16 valve.

1111 Hill Street, Jessup, PA 18434
(800) 451-2002
(570) 383-2428
FAX: (570) 383-9820

Automag division of KCI Industries, Inc.
Manufacturer of "Fail-Safe" normally open Zone Valves

All content © Automag
Internet Services and web design provided by ICON Technologies